Premade or DIY

From E-Bike Wiki
Revision as of 22:26, 3 December 2023 by Kopaz (talk | contribs) (diy vs prebuilt flow diagram added & rewritten main body)
Jump to navigation Jump to search

Premade or DIY, the decision can be tough. Most people don't have any experience in assembling mechanical devices or electrical work.

Overall, DIY seems to be the way to go if you can. Often times, Premade E-bikes come with proprietary batteries & controllers. Some may allow batteries of other brands, some may not.

Therefore, worst case scenario, if you want to get new batteries (that aren't same brand) or customize your prebuilt bike further, you may need to do wiring/soldering work by replacing controller & program new ones if necessary. There are many off the shelf parts for batteries & controllers that aren't proprietary on market. Therefore, for long term ownership, DIY Ebike is more stable, but requires more knowledge since you're not relying on manufacturer/dealership warranty.

Being said, Electrical & Mechanical knowledge is needed due to high current that Ebikes use. This danger goes up as current output increases. If you are not unsure about learning new knowledge or purely due to lack of confidence, Prebuilt Ebikes/mopeds of vetted brand can be a safer bet.

Know your bike! We highly recommend you not convert 'department store' bikes such as Walmart, Canadian tire, etc due to their low part and assembly quality and instead stick to bicycles sold by bike shops or 2nd hand bikes.


Flow diagram for premade vs diy