DIY-battery

From E-Bike Wiki
Revision as of 08:31, 13 September 2023 by Kopaz (talk | contribs) (initial kommit)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Intent: This page is created as a guideline whether if assembling/designing your own battery pack is a viable option compared to buying a pre-made battery. Prerequisite software/knowledge (before building a pack)

Ability to draw 2D schematics/diagrams. - you need to do this if you are trying to make a pack with a certain dimension constraint. use of CAD is encouraged.

You know how to use the simulator - You need to know how much current your battery will be drawing.

Ohm's law. Since we are not going into AC power, complex number/angle is not needed.

Ability to read battery cell datasheet. - As the wiki page becomes older, more cell info will be added to the page; but for cells that are not on this wiki/internet in a simplified format, reading datasheet will be necessary. LG M50LT datasheet, from batteryspace, Simplified datasheet of M50LT, courtesy of Batemo.de